Shackles
Screw Pin Anchor Shackles G-209
The G-209 screw pin anchor shackles meet the requirements of federal specification RR-C-271F Type IVA, Grade A, Class 2, Except for those provisions required of the contractor
Screw Pin Chain Shackles G-210
The G210 screw pin chain shackles meet the performance requirements of federal specification RR-C-271F Type IVA, Grade A, Class 2, except for those provisions required of the contractor.
Bolt Type Anchor Shackles G-2130
The Crosby G-2130 Bolt Type Anchor Shackles with thin head bolt – nut with a collar pin. meets the performance requirements of federal specification RR-C-271F Type IVA, Grade A, Class 3, except for those provisions required of the contractor.
Bolt Type Anchor Shackles S-2135 / S-2145
Crosby S-2135 / S-2145 Bolt Type Alloy Anchor Shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Alloy Bolt Type Anchor Shackles G-2140
Crosby G 2140 E Easy Loc Alloy Shackles are Approved for use at -40 degree C (-40 degree F) to 204 degree C(400 degree F).
Wide Body Shackles G-2160
Crosby G2160 & S2160 Wide Body Bolt Type Lifting Bow Shackles with Nut – Range from 7000kg to 1,550,000kgMaster Links
Welded Master Links Grade 80 A-344
Ultimate Load is 5 times the Working LoadLimit. Applications with wire rope and
synthetic sling generally require a design
factor of 5. Based on single leg sling (in-line
load), or resultant load on multiple legs with
an included angle less than or equal to 120
degrees. ** Proof Test Load equals or
exceeds the requirement of ASTM
A952(8.1) and ASME B30.9.
Welded Master Link Assembly Grade 80 A-347
Ultimate Load is 5 times the Working LoadLimit. Applications with wire rope and
synthetic sling generally require a design
factor of 5. Based on single leg sling (in-line
load), or resultant load on multiple legs with
an included angle less than or equal to 120
degrees. ** Proof Test Load equals or
exceeds the requirement of ASTM
A952(8.1) and ASME B30.9.
Sockets
Open Spelter Sockets G-416
Open Grooved Sockets meet theperformance requirements of Federal Specification RR-S-550E, Type A, except for those provisions required of the contractor.
Closed Spelter Sockets G-417
Closed Grooved Sockets meetthe performance requirements of
Federal Specification RR-S-550 ,
Type B, except for those provisions
required of the contractor
Wedge socket S-421T
Wedge sockets meet theperformance requirements of
Federal Specification RR-S-550E, Type C, except those provisions required of the contractor.